Coffee guides · Automatic machines
Best settings for a bean-to-cup coffee machine
Use a medium roast, set the grinder a step or two finer than the factory setting, the strength to high and the cup size no bigger than the drink needs, then clean the brew unit as the manual says. That fixes most weak, sour or bitter coffee from an automatic machine.
The short answer
Bean-to-cup machines give you a handful of dials: grind, strength (dose), temperature and cup size. Change one at a time, over a few cups, and keep the machine clean. Every model numbers its settings differently, so your manual is the final word.
The settings, one by one
| Setting | What it does | Where to start |
|---|---|---|
| Grind | How fine the built-in grinder mills the beans. Finer means slower, stronger, sweeter, up to the point of bitterness. | Go a step or two finer than the factory setting, one step at a time. Many machines only let you change the grind while the grinder is running; check the manual. |
| Strength / aroma | How much coffee the machine grinds per cup: the dose. | High, or one below. Weak coffee is a common complaint, and more coffee fixes it better than a finer grind alone. |
| Cup size / volume | How much water goes through the coffee. | Keep it to what the drink needs. Running more water through the same dose makes coffee thin and bitter at once. For a long black, add hot water separately if the machine allows. |
| Temperature | Brew water heat. | Medium or high. If coffee tastes sharp, try one step hotter; if harsh, one step cooler. |
| Milk temperature | How hot the auto-frother heats milk. | Not the hottest setting. Overheated milk tastes cooked, and plant milks split more readily. Hand steaming aims for 60–65 °C. |
Give each change two or three cups before judging it. The first cup after a grind change often still contains coffee ground at the old setting.
What the cup tells you
- Weak and watery. Strength up, cup size down. Then a step finer on the grinder.
- Sour or sharp. A step finer, or one step hotter. Light roasts often taste this way in automatic machines.
- Bitter or harsh. A step coarser, cup size down, and check when the brew unit was last cleaned.
- Bitter and stale whatever you do. Clean the machine and use fresher beans; see how long beans stay fresh.
The same logic as a manual espresso machine applies, just with fewer dials: see sour espresso and bitter espresso.
Cleaning
Coffee oils and fine grounds build up inside every automatic machine, and old oils taste bitter and rancid in every cup. Follow your manual’s schedule; the usual jobs are:
- Empty the grounds bin and drip tray often, before they’re full.
- Rinse the brew unit, if yours comes out, and let it dry.
- Clean the milk system after milk drinks: milk left in the lines spoils quickly.
- Run the cleaning and descaling programs when the machine asks, with the tablets or descaler its maker specifies.
- Brush out the bean hopper when it’s empty, so stale oil and dust don’t coat new beans.
Why oily beans cause trouble
The darkest roasts often come out of the roaster with oil on the surface of the beans. In a bean-to-cup machine that oil can be a problem. It can make beans stick together and stop feeding from the hopper into the grinder, and it can coat the burrs and the chute with a film that turns stale. Check what your machine’s manual says about oily or flavoured beans before you use them.
Medium roasts generally carry little surface oil, which is one reason they suit these machines.
Why a medium roast suits automatic machines
- Less oil to clog the grinder, as above.
- More forgiving extraction. An automatic machine gives you only a few steps of grind and temperature. Light roasts often need more than it can give and come out sour; dark roasts go bitter quickly. A medium roast sits in the middle of what the machine can do; more in why we chose a medium roast.
- Good with milk. Many office machines make mostly milk drinks. Our blend tastes of caramel and milk chocolate, and carries through dairy, oat, almond and soy without turning sour.
For offices
One person should own the settings. When everyone nudges the grind, nobody can tell what changed. Pick settings, write them on a note inside the cupboard, and change them only when a new kind of bean arrives. To work out how many beans an office goes through, use our office coffee calculator; for a standing order of whole beans with a tax invoice, see commercial accounts.
Questions
What grind setting should I use on a bean-to-cup machine?
Start a step or two finer than the factory setting and move one step at a time, judging over two or three cups. Settings are numbered differently on every model, so there is no universal number.
Why is my bean-to-cup coffee weak?
Usually too little coffee for too much water. Turn the strength up and the cup size down, then grind a step finer.
Why is coffee from my automatic machine bitter?
A grind that’s too fine, a cup size that’s too large, or a dirty brew unit. Clean it first, then go a step coarser and shorten the cup.
Can you use oily beans in a bean-to-cup machine?
Very oily, dark-roast beans can stick in the hopper and coat the grinder. Check your manual, and choose a medium roast if you’re unsure.
What coffee beans are best for a bean-to-cup machine?
Fresh whole beans in a medium roast: less surface oil than dark roasts, easier to extract than light ones, and good with milk.
